![]()
Should I set tv, movies and music up as separate volumes, or just chuck it all under 1 thin plex volume and share the folders separately (assuming I can?)Ī'm I going to be OK with Raid 5 and Plex? I need the space, and am generally backing up (just copying) across to other devices, but don't want the pain of losing a drive ![]() I was thinking thin volumes gave me the most flexibility - Is that the case? What would be the best way to set up the volumes? I need to do some serious deleting, so I expect those will be worse case data volumes, but whatever way I look at it, it doesn't leave much spare space for unforeseen requirements. Intention is to use the device primarily as a Plex server, but also act as a backup for my photo drive (I've got a primary drive, a spare installed in my second PC, and also upload to Amazon), and general document / system backup.ġ0tb for photos (clone or maybe even backup, the local 8tb drive on my PC will be the primary) #QNAP PLEX MEDIA SERVER NAS HOW TO#I’m not sure why there was no warning from either the NAS itself when performing the firmware upgrade or from Plex about this incompatibility, it took me quite a while to find out what the issue was and work out how to resolve it, so I hope this information helps you.As I loosely mentioned elsewhere, I've bought a QNAP TS 453D NAS and installed 4 x 10tb WD Reds, and configured as Raid 5 - seemed the most sensible compromise. ![]() I appear to have had the 32 bit version which worked fine for many years with QTS 4.2.x and below. ![]() #QNAP PLEX MEDIA SERVER NAS 64 BIT#Tcp 0 0 0.0.0.0:32400 0.0.0.0:* LISTEN 28800/Plex Media ServerĪ QNAP NAS with QTS 4.3.x or above needs the 64 bit version of Plex. Once complete Plex automatically started and I confirmed that it was now listening on port 32400 once more and that the web interface was accessible. Once complete wait a few minutes while the 64 bit version installs. I literally just installed the 64 bit version with the other one still installed and it all worked fine. This can be done by selecting the icon highlighted below in the top right corner of the interface.ĭo not remove the 32 bit version as this will likely remove metadata etc. #QNAP PLEX MEDIA SERVER NAS INSTALL#qpkg file through the App Center interface to install it. I then downloaded the latest version of Plex and uploaded the. Fixing itįinally I found some useful information on the Plex FAQ, specifically question 20 which notes that if you’ve upgraded from QTS 4.2.x to 4.3.x then you need to use the 64 bit version of Plex rather than the 32 bit version. I spent a while looking at the script and made some tweaks, but nothing really helped. ![]() Plex Media Server: No such file or directory Upon trying to start Plex manually through the command line we receive the following error message. I then went into the App Center to try and manually start Plex, but the same problem continually occurred. Plex Media Server hasn't been enabled or started. I first noticed the issue after the firmware update to QTS 4.3.x completed and the NAS had rebooted, as I was presented with the following error message. It was difficult to find information online to fix the problem, so I figured I’d write this short post on how to fix the issue. I recently upgraded the firmware on my QNAP NAS from QTS 4.2.x to 4.3.x, and in doing so Plex stopped working. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |